Categories

SHANGHAI JIANGTONG INTERNATIONAL TRADING CO., LTD

Tel:+86-21-50688657

Fax:+86-21-50688657

E-mail:
sales@epdmrubberflooring.com

Home > News > Content

Rubber Flooring Construction Site Requirements

① Banned at 10 under the following temperature conditions for installation.

② All ground floor must be dry, flat and free of cracks, structure reasonable, and is clean. Free from dirt, paint, wax, oil, grease, tar, fujiu adhesives and otherforeign material.

③ Rubber flooring with seamless splicing, splice joint is straight, smooth, bonding,the appearance of no significant chromatic aberration.

④ All the hardened, quenched in water treatment and destructive compounds must only be removed by mechanical means.

⑤ Humidity should be less than 2.5% of the underlying ground, humidity above the ground floor of 2.5% may not be recommended. If the humidity is higher than the 2.5% of this kind, you should work according to industry standards for water repellent treatment.

⑥ Surface roughness can be up to 5 mm after the primer with self-leveling screed.